Loading ...
Loading ...
Loading ...
31
nuwavenow.com
1. Press Temp and set the cooking temperature (see Temp/Time).
2. Connect the Probe (component) to the
Pro Smart Oven. (Inside, right side).
3. To read the temperature of the Probe
at any time, press Probe once and
the screen will show the current Probe
temperature, no matter the Cooking
Function.
4. To set the Probe target temperature,
press and hold Probe. The screen will
show “Probe”, and “165F”. Turn the Select dial to adjust the
Probe target temperature.
5. Insert the Probe into the food, then push START/PAUSE. The
Pro Smart Oven will start to cook to the set Probe target tem-
perature.
• While cooking, the current Probe temperature will be
displayed along with “Probe”.
Press Temp and the set oven temperature will be
displayed.
Press and hold Probe, and the screen will show the set
target temperature of the Probe. You may then adjust this
by using the Select dial.
Carryover Cooking
When the Pro Smart Oven reaches a set temperature (10F default)
under the Probe target temperature, it will alert you with 3 sets of
short beeps, 2 beeps each. This will happen every time the Probe is
in use.
1. Press and hold Probe, it will show “165F” and “Probe”.
2. Set the Probe target temperature.
3. After you set the Probe target temperature, press Menu + Sear
at the same time. The screen will show “10F”, “Carryover”
and “Sear”. You can then deduct any temperature from 1F to
30F. The main cooking (under stages) will stop at the deducted
Probe temperature and will change to Sear 2 and continue to
cook until it reaches the original Probe target temperature.
4. Once the Probe target temperature is reached during Sear
2, regardless of the set Sear time, it will nish cooking and
display “END”.
Loading ...
Loading ...
Loading ...