Loading ...
Loading ...
Loading ...
38
Installation Instructions - Flush Installation
STEP 11 INSTALL OVERLAY PANELS
(continued)
Custom Handles
• Custom handles must be used for flush installation.
The handle must be properly secured to the overlay
panel before sliding the panel into the trim.
• The cabinet manufacturer will supply the custom
handle and hardware.
• Discard the supplied handle.
• Remove the trim. Peel away a few inches of the
adhesive backing.
IMPORTANT: The tape is very sticky and strong. Once
it adheres to a surface, it cannot be removed without
damaging both surfaces. Do not install the trim
before the final wood panels are in place. Be sure
to align the trim carefully before removing the paper
backing.
• A trim cover kit has been supplied with your
refrigerator. It can be used to cover the exposed
screw holes.
• Install a supplied bracket onto the top of the door,
using a Phillips head screwdriver and the 2 screws
provided. Hand-tighten the screws into the
brackets. Do not overtighten; damage will occur.
• Clean the aluminum trim with rubbing alcohol—
do not use alcohols with oil or lanolin that will
prevent adhesion of double-sided tape.
• Slip the aluminum cover onto the top bracket to
check the fit. The aluminum cover trim has a slot on
each end which fits the bracket.
Reinstall all original screws.
STEP 11 INSTALL OVERLAY PANELS
(continued)
• Carefully place the aluminum cover trim onto the top
bracket so that the bracket is inside the cover trim.
Use the top to bottom grooves along the handle side
to align the cover trim accurately. Align the bracket
with the screw holes in the top of the door. Pull the
tape a few inches at a time while pressing the trim
against the door. Press and hold approximately 10
seconds before continuing along the length of the
door.
• Install another bracket at the bottom of the door to
secure the cover trim. Use a stubby Phillips head
screwdriver and the 2 screws provided.
• NOTE: Make sure there are no gaps in the
installation.
• Follow the same procedure on the opposite door.
Secure top
bracket with
2 screws.
Top Bracket
Top Bracket
Slide aliminum
trim over top
bracket.
Loading ...
Loading ...
Loading ...