Hotpoint SI7 891 SP IX Class 7 Built-in Oven - Stainless Steel

User Manual - Page 22

For SI7 891 SP IX.

PDF File Manual, 31 pages, Read Online | Download pdf file

SI7 891 SP IX photo
Loading ...
Loading ...
Loading ...
22
CLEANING
ACCESSORIES
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required operations
with the oven cold.
Disconnect the oven from the
power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
EXTERIOR SURFACES
Clean the surfaces with a damp microfibre cloth. If
they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with
a damp microfibre cloth.
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they are
still hot.
Food residues can be removed using a washing-up
brush or a sponge.
INTERIOR SURFACES
After every use, start cooling down the oven and
then clean it while it is still a bit warm, removing
any deposits or stains caused by food residues. To
dry any condensation that has formed as a result of
cooking food with a high water content, cool the
oven completely and then wipe it with a cloth or
sponge.
Clean the glass door with a suitable liquid detergent.
The oven door can be removed to facilitate cleaning.
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has nished airing)
running the Pyro cycle.
This function enables you to eliminate cooking
spatters using a temperature of approx. 500°C. At this
temperature, food residues turn into deposits that can
be easily wiped away with a damp sponge once the
oven has cooled down.
If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off
while running the self-cleaning cycle.
Remove all accessories from the oven before
running the Pyro function (including the shelf
guides).
For optimum cleaning results, remove the larger bits
of dirt with a damp sponge before using the Pyro
function.
The oven has two different pyrolytic cleaning
functions: The standard cycle (PYRO) provides
thorough cleaning if the oven is heavily soiled, while
the economic cycle (PYRO EXPRESS) is shorter and
consumes less energy than the standard cycle, which
makes it suitable for use at regular intervals.
It is advisable to run the Pyro function only when the
appliance is very dirty or gives off bad odours during
cooking.
Please note: The oven door cannot be opened while
pyrolytic cleaning is in progress. It will remain locked
until the temperature has returned to an acceptable
level.
Ventilate the room during and after the pyrolytic
cleaning cycle (until the room has been completely
aired out).
CLEANING THE COOKING COMPARTMENT
WITH THE PYRO CYCLE
Loading ...
Loading ...
Loading ...