Loading ...
Loading ...
Loading ...
16
. SETTINGS
Use
or to select Settings from the main menu
then press
to confirm. Select the item that
you would like to change and press
to enter
the Settings menu. Once you have chosen the new
setting, press
.
Please note: With the Eco Mode activated, the display
brightness will be dimmed when the oven is switched
off. During cooking, the light will switch off after one
minute.
. TIMER
When the oven is switched off, the display can be
used as a timer. To activate the function, make sure
that the oven is switched off and then press
: the
timer will flash on the display.
00 : 00 : 00
(HH) (MM) (SS)
Press to set timer, OK to start
Press or to set the length of time you require and
then press
to activate the timer. An audible signal
will sound once the timer has finished counting down
the selected time.
Please note: The timer does not activate any of the
cooking cycles.
To stop the timer at any time, press
.
. KEY LOCK
To lock the keypad, press and hold
and at the
same time for at least five seconds.
Key lock has been activated
To unlock the keypad, repeat the same procedure.
Please note: This function can also be activated during
cooking.
For safety reasons, the oven can be switched off at
any time by pressing the
button.
. AUTOMATIC CLEANING
Use or to select Cleaning from the main menu
then press
to confirm.
Pyro Express
Pyro
2 hour high temperature cleaning
Select "Pyro" or "Pyro Express" from the menu and
press
: the display will show the duration of the
selected cycle and the time it will end.
Press the
button: the display will show the
instructions to be followed in order to start the
cleaning cycle.
2/3
Please remove all accessories from the
oven and press OK
Take particular care to remove all the accessories
from the oven before cleaning, including the shelf
guides.
Once you have followed each instruction, press
to
proceed to the next step.
Upon the final confirmation, the oven will start
the cleaning cycle and the door will be locked
automatically: a message will immediately appear on
the display showing a progress bar to indicate how
the cleaning cycle is progressing.
Door will be locked during cleaning
15:00
-00:59
END TIME
TIME
Cleaning
A message will start flashing on the display once the
cycle has finished. The residual temperature will be
indicated on the display and the door will remain
locked until the temperature inside the oven has
returned to a safe level.
The display will then show the current time.
Loading ...
Loading ...
Loading ...