Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. D | EN9/12/2022Page 62 of 96
BEER TAP CLEANING KIT
REQUIRED TOOLS
BLC SYSTEM
CLEANER
SPANNER
WRENCH
BRUSH
BUCKET AND
FRESH WATER
PUMP BOTTLE
AND TUBE
RUBBER
GASKET
RUBBER
GASKET
DRAFT TOWER CLEANING
Regardless of design, draught dispensers must be
cleaned regularly. Flushing the draught dispenser with
only water is not enough to maintain cleanliness. True
recommends cleaning the draught dispenser whenever
changing to a fresh keg.
Clean dispensers ensure your draught beer will be at
its best when served. Although the beer in the barrel
is in excellent condition, the beer can become less
satisfying if drawn through a beer line and faucet that
are not kept clean.
NOTE: USE CLEANERS APPROVED BY YOUR BEER
SUPPLIER AND FOLLOW THEIR INSTRUCTIONS. IF
YOU ARE USING THE CLEANING KIT PURCHASED
FROM TRUE FOLLOW THE INSTRUCTIONS BELOW.
Prepare Solution:
Add 1/2 ounce (19 grams) of cleaning solution to each
quart of warm water. Fill pump bottle with the mixed
cleaning solution.
Beer Cleaning instructions:
1. Shut-off the CO
2
at the regulator.
2. Remove the tapping device (keg coupler)
from the keg.
3. Unscrew handle from faucet.
4. Remove beer faucet with spanner wrench
(turn clockwise to remove). See image 1.
5. Put tap and faucet parts in a bucket.
6. Thread hose from pump bottle to beer column tap
outlet (be sure rubber gasket is in place to prevent
leakage) – allow beer line to drain in bucket.
See Image 2.
7. Pump solution from bottle through the beer line(s)
into the bucket. Wait 10 minutes while cleaning
solution works through the lines.
8. Use supplied brush to clean beer faucet parts.
See Image 3.
9. Rinse parts thoroughly.
10. Rinse bucket, pump bottle and hose thoroughly
with clean cool water.
11. Fill pump bottle with clean cool water and pump
through lines until water runs clear. (repeat if
necessary)
12. When crystal clear water comes through, you’re
ready to assemble and reattach faucet and re-tap
the keg.
CABINET SETUP
1
2
3
Loading ...
Loading ...
Loading ...