Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. D | EN9/12/2022Page 54 of 96
CABINET SETUP
REQUIRED TOOLS
• Phillips Screwdriver
• Adjustable Wrench
KIT CONTENTS
A. CO
2
Tank (Shipped empty. Fill before use)
B. Draft Standard*
C. Draft Standard Screws
D. Draft Standard Handles*
E. CO
2
Pressure Regulator
(single version/double version)
F. Chill Hose**
G. Rubber Washer
H. CO
2
Hoses*
I. Hose Clamps
J. Safety strap
K. Beer Tapper (Sankey, low profile tapper)
*Double draft standard kit shown.
**Located inside the cabinet.
DRAFT STANDARD INSTALLATION & HOOK UP
WARNING! – CONTENTS UNDER PRESSURE.
TAKE CARE WHEN HANDLING FILLED CO₂
TANKS. IF UNFAMILIAR WITH USING CO₂
TANKS AND/OR REGULATORS, SEEK INFORMATION
FROM YOUR LOCAL DISTRIBUTOR OR BREWER
REPRESENTATIVE BEFORE PROCEEDING.
PROCEDURE
1. Position the rubber gasket over the mounting holes
in the cabinet countertop. See fig. 1.
2. Run the beer line(s) through the hole and into the
cabinet. See fig. 2.
3. With the provided hardware, install the draft
standard. See fig. 3.
4. Install the draft standard handle(s). See fig. 4.
5. Remove the draft standard top. See fig. 5.
FIG. 1.
Position the rubber
gasket around the draft tower
hole.
FIG. 2.
Thread the draft standard
lines into the cabinet.
FIG. 3.
Secure the draft standard
to the countertop.
FIG. 4.
Screw the handles on.
A
E
B
D K
C
G
I
F
J
H
Loading ...
Loading ...
Loading ...