Loading ...
Loading ...
Loading ...
TRUE RESIDENTIAL
®
TEC_TM_156 | REV. D | EN9/12/2022Page 48 of 96
INSTALLATION
90° HINGE INSTALLATION (OPTIONAL)
KIT CONTENTS
• 90° Hinge (left or right)
• Doorstop Bracket (left or right)
REQUIRED TOOLS
Required tools include (but may not be limited to)
the following:
• 3/8" Socket wrench
• Phillips Screwdriver
PROCEDURE
1. Remove the kickplate. See fig. 1.
2. Remove the existing bottom door hinge.
See fig. 2.
NOTE: BE SURE TO SUPPORT THE DOOR
WHILE REMOVING THE HINGE.
3. Carefully slide the door from the top hinge.
See fig. 3.
4. Install the doorstop bracket on the door’s bottom
edge. See fig. 4.
5. Position the door and install the 90° hinge.
See fig. 5.
NOTE: DO NOT COMPLETELY TIGHTEN
THE BOLTS.
6. Verify the door is aligned with the lock latch and
light switch. See fig. 6. Verify the door closes
correctly and the gasket seals without gaps.
Adjust the door as needed.
7. Tighten the hinge bolts.
FIG. 1.
Pull the kickplate off the magnets.
FIG. 2.
Bottom hinge bolt locations.
FIG. 3.
Lower the door off the top hinge.
Loading ...
Loading ...
Loading ...