Loading ...
Loading ...
Loading ...
2 EN
EN
Revision 04/2018Copyright © 2018, Fast ČR, a. s.
Installation instructions
1. Installation instructions
• The device is designed to be powered by 12 Vdirect current. Before installing the
unit, check that your vehicle has a12 Vpower supply with the negative pole going to
ground.
• The negative pole of the battery must be disconnected before the device is
connected. This reduces the probability of damaging the device by an accidental
shorting of the circuit.
• Check that the unit is correctly connected according to the coloured leads based on
the wiring diagram. An incorrect wiring connection could cause the malfunction of the
unit or damage to the vehicle'selectrical system.
• Do not forget to connect the loudspeaker lead marked (-) to the (-) terminal. Never
connect the left and right loudspeaker leads together or to the car body.
• Do not cover the ventilation openings on the unit. Blocking them will increase the
temperatures inside the unit, which may damage it or cause afire.
• This device can playback MP3 and WMA digital sound file formats.
• Do not attempt to repair the unit, modifications to the unit may cause amalfunction
or damage the device.
• Stop the vehicle before performing anything that could interfere with driving.
• Do not turn on the device in extremely high or low temperatures. The normal
operating temperature is between -10 and +50 °C.
ATTENTION
Ensure correct connection, particularly the power supply (larger draw) and
backup memory (smaller draw). This will keep the current draw in the turned off
state to aminimum and maintain your set preferences in the car radio memory.
Loading ...
Loading ...
Loading ...