Loading ...
Loading ...
Loading ...
14 EN
EN
Revision 04/2018Copyright © 2018, Fast ČR, a. s.
Control and operation
4.5.2. Setting up the RDS mode
In the Radio mode screen, touch to select AF (Alternative frequencies) and TA (Traffic
announcement) on/off and select PTY (Program type); confirm the selection using the
“Confirm” symbol and make the settings.
4.5.3. Setting up the RDS mode
Set the device as required so that when receiving the given specific RDS information
(described above) it reacts appropriately.
Alternative frequencies AF
When AF is turned on (AF ON), the device will monitor reception quality. If it declines, it
will search for abetter quality reception of the same station based on the broadcast data,
and when it finds it, it will automatically switch to the strongest signal of the given station.
Traffic announcements
When the TA function is activated, the device scans for astation broadcasting traffic
announcements ("TA SEEK"). When it finds such astation, it stays tuned to it and the TP
indicator is lit. If reception quality declines, again start ascan for the reception of other
stations with sufficient quality.
If the TA mode is activated and atraffic announcement is being broadcast:
–
"TRAFFIC" will appear on the display.
–
when the device is in adifferent operating mode than FM radio, it will temporarily
switch to radio
When the TA function is activated:
–
And you use the
EN
buttons to scan for stations, it will always find stations
that provide TA broadcasts.
–
And astation with TP information is tuned, TP is shown on the display.
PTY program – selection
After selecting the PTY mode, the radio will start to scan for corresponding PTY
information and will stop if it detects corresponding PTY information. If the corresponding
PTY information does not exist, the PTY mode will switch back to normal mode.
Loading ...
Loading ...
Loading ...