Loading ...
Loading ...
Loading ...
EN
7
Safety
www.bora.com
X
Check the information on the identification plate
and in the event of deviations, do not connect the
appliance.
X
Conduct all work extremely attentively and
conscientiously.
X
Do not connect the appliance to the mains until
the duct system has been installed or the
recirculation filter has been fitted.
X
Only use the connection cables supplied. Where
necessary these are included in the scope of
delivery.
X
Do not use the appliance until installation is
complete. This is the only way to ensure safe
operation.
DANGER!
Risk of electric shock from damaged appliance
A damaged appliance can cause an electric shock.
X
Check the appliance for visible damage prior to
installation.
X
Do not install or connect any damaged
appliances.
X
Do not operate any damaged appliances.
CAUTION!
Risk of burning from control knobs that are
not positioned optimally.
If the control knobs are not installed in a suitable
place, during operation there is a risk of sustaining
burns from the cooktop surface.
X
Only install the control knobs in a suitable place,
which is practical and safe.
2.4.1 Safety instructions for cooktop
installation
DANGER!
Risk of electric shock from incorrect mains
connection
Connecting the appliance to the mains incorrectly
poses a risk of electric shock.
X
Make sure that the appliance has a fixed
connection to the mains voltage.
X
Make sure that the appliance is connected to a
properly installed protective conductor system.
X
Make sure that technical equipment is provided
to enable all of the appliance’s poles to be
disconnected from the mains with a contact
opening width of at least 3mm (LS switch and
automatic circuit breakers, fuses, contactor).
DANGER!
Risk of electric shock from damaged power
supply cable
If the power supply cable is damaged (e.g. during
installation or by coming into contact with hot
cooking surfaces), this can cause an (lethal)
electric shock.
X
Make sure that the power supply cable does not
become trapped or damaged.
X
Make sure that the power supply cable does not
come into contact with hot cooking surfaces.
Special safety instructions for the installation
of gas cooktops
i
Gas installation, appliance installation and
replacing the gas nozzles, as well as changing
the gas type and pressure, may only be carried
out by reliable trained specialists, who are
familiar with and comply with the standard
national regulations and supplementary
regulations of the local utility companies.
X
Observe the special instructions on changing the
gas type and pressure and the specifications for
changing the gas nozzles in the nozzle table (see
Operating instructions).
BORA gas cooktops must only be used with BORA
cooktop extractors.
DANGER!
Risk of explosion and asphyxiation from gas
Leaking gas can lead to an explosion and result
in severe injuries and property damage, or
asphyxiation.
X
Keep sources of ignition (naked flames, electric
fires) away and do not operate any light
switches, or switches on electrical appliances.
X
Do not remove plugs from sockets (risk of
sparking).
X
Close the gas supply immediately and turn off
the mains supply.
X
Ensure there is a good supply of fresh air (open
doors and windows).
X
Plug any leaks immediately.
Loading ...
Loading ...
Loading ...