Loading ...
Loading ...
Loading ...
EN
27
Installation
www.bora.com
Standard cooking zone connection
5 4
3
2
1
Abb. 5.32 Standard connection of appliances that connect at
the front
[1] Cooktop
[2] Rear cooking zone (zone 2)
[3] Front cooking zone (zone 1)
[4] Rear cooking zone control knob (zone 2)
[5] Front cooking zone control knob (zone 1)
Connecting the cooking zones when the cooktop is
installed rotated by 180°
5 4
3
2
1
Abb. 5.33 Connecting the cooking zones when the cooktop is
installed rotated by 180° and the ports are on the
front of the appliance
[1] Cooktop
[2] Rear cooking zone (zone 1)
[3] Front cooking zone (zone 2)
[4] Rear cooking zone control knob (zone 1)
[5] Front cooking zone control knob (zone 2)
X
Connect the port on the back of the left control knob [5] to
the “zone 2” port on the cooktop [1].
X
Connect the port on the back of the right control knob [4] to
the “zone 1” port on the cooktop [1].
X
Using the configuration menu, set the correct allocation of the
cooking zones in the control knob display (see “Configuration
menu” – “0° or 180° installation”).
5.9.2 Establishing contact between the
cooktop extractor and cooktops
ZONE1 INTERF. COM1 ZONE2
ZONE1 INTERF. COM1 ZONE2
4
3
1
2
Abb. 5.34 Establishing contact between the cooktop extractor
and cooktops
[1] Cooktop extractor communication cable port for left cooktop
[2] Cooktop extractor communication cable port for right cooktop
[3] Cooktop communication cable port
[4] Cooktop to cooktop extractor
X
Using the communication ports provided, connect the
cooktop extractor [1]/[2] to the cooktop or cooktops [3].
X
Only use the cables supplied in the scope of delivery.
i
The full range of functions on the appliances will only
be available if the cooktop extractor and cooktops are
connected correctly.
5.9.3 Connecting the power supply
i
Assembly, installation and commissioning must always
occur in line with national laws, regulations and
standards.
i
The work must be performed by qualified specialists who
know and comply with the additional regulations of the
local energy supply companies.
i
The appliances may only be connected to the mains
power supply by certified specialists. The specialist also
assumes responsibility for the proper installation and
commissioning.
Loading ...
Loading ...
Loading ...