GE - General Electric JKP55SM3SS GE electric wall oven

User Manual - Page 21

For JKP55SM3SS.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
GEPpp/iance&com
GoO Gro
LstortJ
ooki_
imeJ
I 2 3 z_ 5
or
®®
{depending on model)
1 2 3 4 5
OF
®
®
Tem_
tdependingon model)
When the display shows D the oven
is set in Sabbath, When the display
shows D C the oven is
baking/roasting,
How to Set Sabbath Feature for Timed BaMng/Roasting - Immediate Start and
Automatic Stop
NOTE: Tounderstandhow the ovencontrol
works,practice using regular (non-Sabbath)
Immediate Start and Automatic Stop before
entering the Sabbathmode
Make sure the clockshows the correct time
of day
[_ Press and hold both tile Bake and
Broil Hi/to pads, at the same time,
unOl the display shows SE
NOTE: If bake or broil appears in
the display, the Bake and Bmi/Hi/to
pads were not pressed atthe same
time. Press file Clear/Offpad and
begin again.
[_ Tap tile Belay Start pad until SAb
bAtH appears in tile display:
[_] Press tile Start pad and D will appear
in the display:
[_ Press tile Cooking Time pad.
%
g2
%
On models with number pads, press
them to set tile desired length of
cooldng time between 1 minute and
9 houls and 99 minutes.
On models widl Hourand Min + or -
pads, press diem to set the desired
lengfll of cooldng 0me bet_,veen 1
mim_te and 9 hams and 59 mimlws.
Tile cooking time that you entered
will be displayed°
Press tile Start pad.
Press the Bake pad. No signal will
be given.
On models with nmnber pads, press
them in order to set tile desired
temperatme.
%
On models with Temp+ and - pads,
tile preset starting temperature will
automatically be set to 350 °. Tap the
Tamp+ or - pads to increase or
decrease tile mmperamre in 5 °
increments. (The Temp + or - pad
should be tapped for each
temperature change; pressing and
holding these pads will not allow
accmam temperature setting.)
Tile temperature can be set
be_,veen 170 ° and 550 °.
No signal or temperature will be
given.
Press tile Start pad.
After a random delay period of
approximately 30 seconds to 1
minum, D C will appear in the
displ W indica0ng that the oven is
baking/ro_Lsdng. If D C does not
appear in tile display, start again
at step 7.
To adjust tile oven temperature, press tile
Bakepad and enmr the new mmperamre
using tile number pads (on some
models) or mp tile Tamp+or - pads (on
some models) to increase or decrease the
temperature in 5° increments. (The Tamp
÷or - pad should be rapped for each
mmperamre change; pressing and
holding these pads will not allow
accuram temperature setting.)
Press the Startpad.
When cooking is finished, the display
will change fiom D C to D and 0:00will
appem; indicating that the oven has
mined 0FFbut is still set in Sabbath.
Remove the cooked fbod.
k_0ff_) :
LstarL)
How to Exit the Sabbath Feature
[_ Press tile Clear/Off pad.
[_ If tile oven is cooldng, wait
for a random delay period of
approximately 30 seconds to 1
minute, until only D is in tile display.
[_ Press and hold both tlle Bake and
Broil Hi/to pads, at the same time,
until tile display shows SE
[_ Tap tile Oelay Start pad until 12shdn
or nOshdn appears in tile display: 12
shdn indicates that tile oven will
automaOcally mrn off _d*er 12 hems.
no shdn indicates that tile oven will
not automa0cally turn off.
[_] Press tile Start pad.
NOTE: If a power outage occurred while
tile oven \,wksin Sabbath mode, tile oven
will automa0cally turn off and tile oven
control must be reset.
21
Loading ...
Loading ...
Loading ...