GE - General Electric RB747 Legacy

User Manual - Page 26

For RB747.

PDF File Manual, 28 pages, Download pdf file

Loading ...
Loading ...
Loading ...
m
-
- Questions?
-’
Use This Problem Solver
-
PROBLEM
[
POSSIBLE CAUSE AND REMEDY
OVEN WILL NOT WORK
Plug on range is not completely inserted in the electrical outlet.
The circuit breaker in your house has
been tripped, or a fuse has been blown.
Oven controls not properly set.
Door left in
locked
position after cleaning.
OVEN LIGHT
Light bulb is loose.
DOES
N~
WORK
Bulb is defective. Replace.
Switch operating oven light is broken. Call for service.
FOOD DOES
N~
OVEN SET knob not set at BROIL.
BROIL PROPERLY
OVEN TEMP knob not set at BROIL.
Door not left ajar as recommended.
Improper
shelf
position being used. Check Broiling
Guide.
Necessary preheating was not done.
Food is being cooked on hot pan.
Utensils are not suited for broiling.
Aluminum foil used on the broil pan rack has not been fitted properly and slit
as recommended.
FOOD DOES NOT ROAST
OVEN SET knob not set on BAKE.
OR BAKE PROPERLY
OVEN TEMP knob not set correctly.
Shelf position is incorrect. Check Roasting or Baking Guides.
Oven shelf is not level.
Incorrect cookware or cookware of improper size is being used.
A foil tent was not used when needed to slow down browning during roasting.
CALROD@
SURFACE UNITS Surface units are not plugged in solidly.
NOT
FUN~IONING
PROPERLY
Trim rings and drip pans are not
set securely
in the range top.
Surface unit controls are not properly set.
OVEN WILL
N~
Automatic timer dials not set or not set properly. Clock must be set to time of day
SELF-CLEAN
and the
S~P
dial must be set and
advancd
beyond the time noted on oven
clock.
The
S~P
dial was not advanced for long enough.
Both OVEN SET and OVEN TEMP knobs must be set
at
CLEAN setting.
A thick pile of
spillover
when cleaned leaves a heavy layer of ash in spots
which could have insulated the area from further heat.
Latch not moved to the right.
OVEN DOOR
Turn OVEN SET knob to CLEAN. Glowing Locked Light after knob is turned
WON’T
LA~H
indicates oven is too hot from previous use and door won’t latch. To
cool
oven,
open door wide, then Latch can be moved.
OVEN SET knob must beat CLEAN or OFF before Latch can be
m(~ved.
If you need more help.. call, toll free:
GE Answer Center”
8W.626.2~
consumer information service
26
Loading ...
Loading ...