Loading ...
Loading ...
Loading ...
Surface Units
Clean the area under the drip
pans often. Built-up soil, especially
grease, may catch fire. To make
cleaning easier, plug-in units are
removable and stay-up unit lifts
up and locks in the up position.
Caution: Be sure all controls are
turned to OFF and surface units
are cool before attempting to lift
or
remove them.
After
I
ifting
the stay-up unit or
renlt)ving
plug-in units, remove
the
trim rings
and
drip pans
under
the
units
and
clean
them according to
directions in the Cleaning Guide on
page
25. Wipe around the edges of
the
surface
unit openings. Clean
the
area
below
the units. Rinse all
wushed
ureas
with
a
damp
cloth
or
sponge.
Plug-In Surface Units
Plug-in units
can
hc
rcmovcd.
,/
Lilt
a
plug-in unit tibout 1“ ahovc
the
trim ring—just enough to grasp
it–-and you
can
pul
I
it out.
Do not lift a plug-in unit more
than
1:’
If you do, it may not lie
flat on the trim ring when
you
plug it back in.
To
replace a plug-in unit:
. First
place
the drip pan, then
the trim ring into the surface unit
cavity found on top of the
cooktop
so the unit receptacle can be seen
through the opening in the pan.
●
Insert the terminals of the plug-in
unit through the opening in the drip
pan and into the receptacle.
●
Guide the surface unit into place
so it fits evenly into the trim ring.
Note: The drip pan must be under
the trim ring.
CAUTION
●
Do not attempt to clean plug-in
surface units in an automatic
dishwasher.
● Do not immerse plug-in surface
units in liquids of any kind.
●
Do
not bend the plug-in surface
unit plug terminals.
● Do not attempt to clean, adjust
or in any way repair the plug-in
receptacle.
The 3-in-1 Stay-Up
Surface Unit
Stay-up unit cannot be removed.
You
can lift the stay-up unit upward
about 6“ and it will lock in the up
position.
To reposition the stay-up unit:
● Replace the drip pan
and
trim
ring into the recess in the
cooktop.
. Put the trim ring in place over
the drip pan. The drip pan must
be
under the trim ring.
● Guide the surface unit into
place
so it fits evenly into the trim ring.
I
Repeated lifting of the plug-in
unit more than 1“ above the trim
ring
can
permanently damage
the receptacle.
23
Loading ...
Loading ...
Loading ...