Loading ...
Loading ...
Loading ...
Installation
*INSTALLATION*
49
Installation
The drawer has an integrated va-
cuum pump which contains oil.
To prevent oil from leaking out, the
drawer must be transported and
stored in a horizontal position only.
Do not tilt the drawer and do not
stand it up on its side.
Preparing the drawer
For safe transportation, the vacuum
pump is provided with a transit device
which must be removed before installa-
tion. The air filter supplied must be fit-
ted in place of the transit device.
There are also 2safety screws on the
back of the drawer to prevent the
drawer from being opened unintention-
ally during transportation and when it is
being removed from the packaging.
Fit the air filter before building in the
drawer and remove the safety
screws at the back.
Otherwise the drawer cannot be op-
erated and has to be taken out of the
housing unit.
Keep the transit device and safety
screws for any future transportation.
The transit device can be secured to
the back of the drawer.
Fitting the air filter and removing the
safety screws
Slide the cover to the right and re-
move it.
Pull the red transit device up and
out, e.g. with universal pliers.
Loading ...
Loading ...
Loading ...