Maytag MER6555ACW electric freestanding range

User Manual - Page 16

For MER6555ACW.

PDF File Manual, 76 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Se f-C ean Oven
It is normal for parts of the range to become hot dull ng a
To prevent damage to oven door. do not attempt to open
the door when "Lock" is displayed.
Avoid touching cooktop, door. window or oven vent area
Do not use commercial oven cleaners on the oven finish
or around any part of the oven. They will damage the
finish o_ parts.
Do net leave baking/pizza stone in the oven during
self=clean.
The sdf-cban cycb uses above-normai cooking temperatures
to automatically dean the oven interior.
It is normai for flare-ups, smoking, or flaming to occur during
cbaning if the oven is heavily soiled. It is better to clean the
oven regularly rather than to wait until there is a heavy build-
up of soil in the oven.
During the cleaning process, the kitchen should be well
ventilated to get rid of normal odors associated with cleaning.
Before Seff-Cmeaning
1. Turn off the oven light before cleaning. The light may burn
2. Remove broiler pan, all pans, and oven racks from the
oven. The oven racks will discolor and may not slide easily
after a self-dean cycle if they are not removed.
3. Clean oven frame, door frame, area outside of gasket, and
around the opening in the door gasket with a nonabrasive
cleaner such as Ban Ami* or detergent and water. The
stir-charting process does not
clean these areas. They should be
cleaned to prevent soil from baking
on during the clean cycle. (The
gasket is the seal around the oven
door and window.}
4. To prevent damage, do not clean or
rub the gasket around the oven door. The gasket is
designed to seal in heat during the clean cycle.
5. Wipe up excess grease or spillovers from the oven bottom.
This prevents excessive smoking, flare-ups or flaming
during the clean cycb.
6. Wipe up sugary' and acidic spillovers such as sweet
potatoes, tomato, or milk-based sauces. Porcelain enamel
is acid-resistant, not acid-proof. The porcelain finish may
discolor if acidic spills are not wiped up before a self-
clean cycle.
Notes:
, Oven temperature must be below 400° Fto program a
clean cycle.
, ORly are over car be cleared at a time°
, Both oven doors lock when either oven is being
cleaned.
To set Self-Clean:
1. Close the oven door.
Clean
/
2. Press the Clean pad.
, "Clean" and "SEt" flash in the display.
If the door is not closed within 25 seconds, the self-
cleaning operation will be canceled and the display will
return to the time of day.
3. Press the More+ or Less- pad.
, "MEd" for medium amount of soil (3 hours}
appears in the display.
If the door is not closed, "door" will appear in
the display. After 45 seconds, three beeps will
sound, the sdf-cbaning operation will be canceled
and the display will return to the time of day.
4. Press the More+ pad twice for heavy soil (4 hours}.
, "HVy" will be displayed.
Press Less- pad twice for light soil (2 hours}.
, "LITE" will be displayed.
Choosing the soil level of the oven automatically programs
the sdf-cbaning time. "Lock" flashes in the display.
5. After four seconds, the oven will start cleaning.
, The cleaning time will start counting down in the display.
, "Lock" will appear in the display and will flash until the
doors are locked. "Lock" will then remain lit.
, "Clean" will remain lit in the display.
To Delay a Serf-Clean CycJe:
1. Press the Delay pad oRce for upper
oven and twice for lower oven.
, "dLY" flashes.
, "0:00" flashes in the display.
2. Press the More+ or Less- pad to set the
amouRt of time you wart to delay the
cycle. Delay time can be set from ten minutes
coRto
(10:00} to 11 hours, 59 minutes (11:59}.
* Brand names for cleaning products are registered trademarks of the respective manufacturers,
15
Loading ...
Loading ...
Loading ...