Loading ...
Loading ...
Loading ...
10. Using the Wi-Fi/Bluetooth function
294
Search for available wireless access points.
• Confirm encryption key of the wireless access point if the network authentication is encrypted.
1 Select the wireless access point.
• To search for wireless access points again, press [DISP.].
• If no wireless access point is found, refer to “Connecting
by Manual Input” on
P294.
2 (If network authentication is encrypted)
Enter the encryption key.
• For information on how to enter characters, refer to
P64.
∫ Connecting by Manual Input
• Check the SSID, network authentication type, encryption type, and encryption key of the
wireless access point to be connected.
1 On the screen displayed in step
1 of “[From List]”, select [Manual Input].
2 Enter the SSID of the wireless access point you are connecting to, then select [Set].
• For information on how to enter characters, refer to
P64.
3 Select the network authentication type.
4 (When an option other than [No Encryption] is selected)
Enter the encryption key.
[From List]
[WPA2-PSK]
Supported encryption methods: [TKIP], [AES]
[WPA2/WPA-PSK]
[No Encryption] —
• Check the wireless access points instruction manual and settings when saving a wireless
access point.
• If no connection can be established, the wireless access point’s radio waves may be too
weak.
Refer to “Message Display”
(P325) and “Troubleshooting” (P328) for details.
• Depending on your environment, transmission speed between the camera and wireless
access point may decrease. In addition, the wireless access point may not be available for
use.
Loading ...
Loading ...
Loading ...