LS360HLV User Manual

Loading ...

Single Zone High Efciency, Standard, Extended Pipe and Mega Wall Mount Installation Manual

Due to our policy of continuous product innovation, some specifications may change without notification.

GENERAL INSTALLATION GUIDELINES

• The unit should be installed in a soundproofed mechanical room.

• Avoid installing the outdoor unit where it would be directly exposed

to ocean winds.

• Install the outdoor unit on the side of the building opposite from

direct ocean winds.

• Select a location with good drainage.

• Periodically clean dust or salt particles off of the heat exchanger

with water.

• If the outdoor unit must be placed in a location where it would

be subjected to direct ocean winds, install a concrete windbreak

strong enough to block any winds.

• Windbreak should be more than 150% of the outdoor unit’s height.

There must be 2ft and 3 1/2 inches clearance between the outdoor

unit and the windbreaker for purposes of air flow.

Additional anti-corrosion treatment may need to be applied to the

outdoor unit at oceanside locations.

Ocean winds may cause corrosion, particularly on the condenser and

evaporator ns, which, in turn could cause product malfunction or

inefcient performance.

Oceanside Applications

Figure 1: Oceanside Placement Using Windbreak

Figure 2: Placement Using Building as Shield

Oceanside Applications

Use of a Windbreak to Shield from Sea Wind

Sea wind

Windbreak

Oceanside Applications

Use of a Building to Shield from Sea Wind

Sea wind

Building

If a windbreak is not possible, a building or larger structure must

be used to shield the outdoor unit from direct exposure to the sea

wind. The unit should be placed on the side of the building directly

opposite to the direction of the wind as shown in Figure 2.

Loading ...

User Manual - Page 24