Loading ...
Loading ...
Loading ...
INSTALL REAR WHEELS "FABRIC TOP" GRASS CATCHERS
("HIGH WHEEL" MOWERS ONLY)
Some high wheel models require washers
which will be provided in a parts bag, If
provided, install washers on the axle first
as shown,
+ Install one (1) rear wheel on the axle of
rear wheel adjuster_
, Install 3/8-16 locknut and tighten se+
curely.
,, Repeat procedure for other rear wheel,
Axle
tocknut assembly
ASSEMBLE GRASS CATCHER
(REAR DISCHARGE MOWERS ONLY)
IMPORTANT: Ifyour model lawn mower
is mulcher ready, the mutcher plate or plug
must be removed before using moweras
a bagger+To converl mower tobagging or
discharging, see the Operation section in
this manual,
Look at the different grass catcher illustra-
tions that follow, Determine which type
of grass catcher you have and follow the
appropriate instructions+,
\
Frame
handle
Frame
opening
TO ASSEMBLE AND ATTACH GRASS
CATCHER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom,,
° Slip vinyl bindings over frame+
NOTE: Ifvinyl bindings are too stiff, hold
them inwarm water for a few minutes° if
bag gets wet, tet it dry before using+
= Lift the rear door on the mower housing,,
, For HINGE BRACKET mounted catcher,
place the grass catcher frame onto the
formed tabs on the rear door hinge
bracket.
"_'---_ Reardoor
Hingebracket
Formed tabs
Grass
catcher
frame
° For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets,
Handte bracket Rear
Grass
catcher
handle
\
Catcherframesidehook
Loading ...
Loading ...
Loading ...