Loading ...
Loading ...
Loading ...
3 POSITION "QUICK" HANDLES _'.... ;__'::TO REMOVE/REPLACE DRIVE BELT
The handle on your lawn mower has three FRONT WHEEL DRIVE MODELS:
(3) height positions - adjust to height that
suits you.
,, Squeeze the bottom ends of lower
handle towards each other until the pin
in handle can be inserted into one of the
three height adjustment holes,
Mediurr
SQ
Handle
adjustment
brackel
Low
: "STANDARD" OR "DUAL BAIU' MODELS:
° Remove drive cover., Remove belt from
gearcase pulley by pushing down on
pulley and rolling belt off it,
* Turn lawn mower on its side., See
engine manual for proper direction of
turningover the engine,,
o Remove blade.,
° Remove belt from engine pulley on
crankshaft°
° Install new belt by reversing above steps,
NOTE; Always use factory approved belt
to assure fit and long life.
PUSH
DOWN-..
Drive
cover
Pull
"QUICK RELEASE" HANDLES
The upper handle may be adjusted to
three (3) different height positions.,
1_ Loosen both handle levers enough to
allow the upper handle to pivotto the
desired adjustment posilion,
24 Tighten both handle levers securely_
LEVERS'._
DOWN
TOADJUST
HANDLE
levers
"AUTO WALK" or'_/ARI-SPEED" MODELS:
° Remove drive cover and belt keeper°
° Remove beltfrom gearcase pulley bypush-
ing down on pulley and roiling belt off it,
• Turn lawn mower on its side,. See
engine manual for proper direction of
turningover the engine.
. Remove blade and debris shield°
° Remove belt from engine pulley on
crankshaft.
. Install new belt by reversing above
steps°
NOTE: Always use factory approved belt
toassure fit and long life.
Drive
cover
Bell ",
PUSH
DOWN
28
%
Loading ...
Loading ...
Loading ...