Loading ...
Loading ...
Loading ...
OPERATORPRESENCE CONTROL
BAR (ALL MODELS)
Your lawn mower is equipped with an op-
erator presence control bar which requires
the operator to be positioned behind the
lawnmower handle in order to start and
erate the lawn mower_
AUTION: Federal regulations require
an engine control to be installed on this
lawn mower in order to minimize the risk
of blade contact injury, Do not under
any circumstances attempt to defeat the
function of the operator control. The blade
turnswhen the engine is running,
DRIVE CONTROL
"STANDARD" DRIVE CONTROL
° Self-propelling is controlled by holding
the operatorpresence control bar down
tothe handle and pushing the drive
controllever forward until itclicks;then
re_easing the lever,
o Forward motion will stop when the op-
erator presence control bar is released,,
To stop forward motion without stopping
engine, release the operator presence
control bar slightly until the drive control
disengages_ Hold operator presence
control bar down against handle to con-
tinue mowing without self-propelling,
o To keep drive control engaged when
turning corners, push down on handle
and lift front wheels off ground while
turning lawn mower,,
TO ENGAGE DRIVE CONTROL
Operator
presence
contro_bar
DRIVE CONTROL DISENGAGED
17
Loading ...
Loading ...
Loading ...