Loading ...
Loading ...
Loading ...
3. Secure rear of side discharge deflector
to lawn mower housing with knob_
= Mower isnow ready for side discharging
operation,
SIMPLE STEPS TO REMEMBER WHEN
CONVERTING YOUR 18" HI-VAC:
FOR MULCHING -
1- Grass catcher, discharge chute and
side discharge deflector removed
2. Mulcher door secured to mower hous-
ing with knob
FOR REAR BAGGING -
1. Side discharge deflector removed.
2. Grass catcher and discharge chute
installedwith discharge chute secured
to lawn mower housing with knob,
FOR SIDE DISCHARGING -
1_ Grass catcher and discharge chute
removed
2. Side discharge deflector installed and
secured to mower housing with knob_
,_CAUTION: Do not run your lawn mower
wllhout mulcher door closed; side dis-
charge deflector installed,or discharge
chute and approved grass catcher in
place,, Never attempt to operate the lawn
mower with mulcher door removed or
propped open.
TO EMPTY GRASS CATCHER
1. Remove grass catcher with clippings
from lawn mower using both front and
center of handle as shown°
2 Empty clippings from grass catcher,
3, Reinstall grass catcher on rear door,
NOTE: Do not drag the bag when empty-
ing; it will cause unnecessary wear,
Handle
21" (53cm) HI-VAC MODELS:
Your lawn mower was shipped ready to
be used as a mulcher., To convert to rear
bagging or side discharging:
REAR BAGGING
1, Remove knob securing mulcher door to
lawn mower housing°
handle
,Crossbar
Grass
Round
door
chute
_%_Knob
Threaded
stud
Mulchor door
2_
Open mulcher door and inserttabs
of discharge chute into hinge bracket
opening and position rear of chute over
threaded stud,,
Hinge bracket Muicher door
15
Loading ...
Loading ...
Loading ...