Loading ...
Loading ...
Loading ...
"DUALBAIL" DRIVE CONTROL
. To start forward motion, lift drive control
bar up to handle°
° Tostop forward motion, release drive
control bar_
Operator
presence
control bar
DRIVE CONTROL ENGAGED
"AUTOWALK" DRIVE CONTROL
o Self-propelling is controlled by holding
the operator presence control bar down
to the handle and pulling the ddve con-
trollever(s) rearward to the handle. The
farther toward the handle the lever(s)
are pulled, the faster the unit will travel.
. Forward motion will stop when either
the operator presence control bar or a
drive control lever are released°To stop
forward motion without stopping engine,
release the drive control lever(s) only.
Hold operator presence control bar
down against handle to continue mowing
withoutself-propelling,
NOTE: If after releasing thedrive control the
mowerwili not rollbackwards, push the mower
forward slightly to disengage drive wheels,,
DRIVE CONTROL DISENGAGED
control presence
lever(s) control ba_
TO ENGAGE DRIVE CONTROL
turnbuckle
DRIVE CONTROL DISENGAGED
FRONT WHEEL DRIVE MODELS ONLY:
- To keep drive control engaged when
turning corners, push down on the
handle to lift the front wheels off the
ground while turning lawn mower,
18
Loading ...
Loading ...
Loading ...