Loading ...
Loading ...
Loading ...
Broadcastingis onlyavailable when the Source is set to TV.
The Broadcasting menu cannot be accessed while you watch TV using a cable
The Broadcasting option box or satellite receiver.
has been deactivated. The Broadcasting menu cannot be accessed while a recording is in progress or
the Timeshift function is running.
If the Use Mode is set to Store Demo, the TV's audio and video settings are
The settings are lost automatically reset every 5 minutes.
after 5 minutes or every Change the Use Mode ((MENU/123) _> MENU ]> Support :> Use Mode) to Home
time the TV is turned off. Use.
Check the cable connections and reconnect them.
There is an intermittent Loss of audio or video can be caused by using overly rigid or thick cables.
loss of audio or video. Make sure the cables are flexible enough for long term use. If you are mounting
the TV to a wall, we recommend using cables with 90-degree connectors.
There are small particles This is part of the product's design and is not a defect.
on the TV's bezel.
The PIP menu is not PIP functionality is only available when you are viewing video from an HDMI or
available. Component source on the main screen.
A POP (TV's internal
Change the Use Mode ((MENU/123) > MENU > Support ]> Use Mode) to Home
banner ad) appears on
Use.
the screen.
The TV is making a The expansion and contraction of the TV's outer casing may cause a popping
popping noise, noise. This does not indicate a product malfunction. The TV is safe to use.
Your TV utilizes high-speed switching circuits and high levels of electrical
current. Depending on the TV's brightness level, the TV may seem slightly
noisier than a conventional TV.
The TV is making a Your TV has undergone strict quality control procedures that meet our
humming noise, demanding performance and reliability requirements.
Some noise coming from the TV is considered normal and is not an acceptable
cause for an exchange or refund.
Loading ...
Loading ...
Loading ...