Loading ...
Loading ...
Loading ...
97
Appendix
6
Error Messages
Error Messages Description
Memory card full
The memory card is full and no more
images can be saved. Insert a new
memory card or delete unwanted files.
No image
There are no images that can be
played back on the memory card.
This image cannot be displayed
You are trying to play back an image in
a format not supported by this camera.
You may be able to play it back on
a computer.
No card in the camera
There is no memory card inserted
in the camera.
Memory card error
The memory card has a problem,
and image capture and playback are
impossible. You may be able to play
it back on a computer.
Or, the camera failed to initialize the
Eye-Fi function when using the Eye-Fi
card. Press E.
Card is not formatted
The memory card you have inserted is
unformatted or has been previously
used on another device and is not
compatible with this camera.
Use the card after formatting
it with this camera. (p.36)
Card is locked
The write-protect switch on the
memory card you have inserted
is locked. (p.4)
This image cannot be magnified
You are trying to magnify an image
that cannot be magnified.
The image is protected
You are trying to delete an image that
is protected. Remove protection from
the image. (p.83)
Not enough battery
power remaining to
activate Pixel Mapping
These messages appear when you try
to perform Pixel Mapping or Sensor
Cleaning, or to update the firmware
if the battery level is insufficient.
Install a fully charged battery.
Not enough battery
power remaining to
clean sensor
Not enough battery
power remaining to
update the firmware
Unable to update firmware. There
is a problem with the firmware
update file
Unable to update the firmware.
The update file is damaged.
Try downloading the update file again.
Image folder cannot be created
The maximum folder number (999)
is being used, and no more images
can be saved. Insert a new memory
card or format the card.
Unable to store image
The image could not be saved
because of a memory card error.
The operation could not be
completed correctly
The camera was unable to adjust
the manual white balance.
Try the operation again.
No more images
can be selected
You are trying to select more than the
maximum number of images for Select
& Delete, Protect, RAW Development,
Image Copy, or Eye-Fi Image
Transfer.
No image can be processed
There are no images that can be
processed using the Digital Filter
or RAW Development function.
Error Messages Description
Loading ...
Loading ...
Loading ...