Loading ...
Loading ...
Loading ...
4
• Avoid contact with garbage, mud, sand, dust, water, toxic gases,
or salt. These could cause the camera to breakdown. Wipe the
camera to dry off any rain or water drops.
• Do not press on the monitor with excessive force. This could
cause it to break or malfunction.
• Be careful not to overtighten the screw in the tripod socket when
using a tripod.
• Do not clean the camera with organic solvents such as thinner,
alcohol, and benzine.
• Use a lens brush to remove dust accumulated on the lens.
Never use a spray blower for cleaning as it may damage the lens.
• Please contact your nearest service center for professional
cleaning of the CMOS sensor. (This will involve a fee.)
• Periodic inspections are recommended every one to two years
to maintain high performance.
• Do not store the camera with preservatives or chemicals. Storage
in high temperatures and high humidity can cause mold to grow
on the camera. Remove the camera from its case and store
it in a dry and well-ventilated place.
• Avoid using or storing the camera where it may be exposed
to static electricity or electrical interference.
• Avoid using or storing the camera in direct sunlight or in locations
where it may be exposed to rapid changes in temperature
or to condensation.
• The SD Memory Card is equipped
with a write-protect switch. Setting
the switch to LOCK prevents new
data from being recorded on the
card, the stored data from being
deleted, and the card from being
formatted by the camera or
computer.
• The SD Memory Card may be hot when removing the card
immediately after using the camera.
• Do not remove the SD Memory Card or turn off the power while
the card is being accessed. This may cause the data to be lost or
the card to be damaged.
• Do not bend the SD Memory Card or subject it to violent impact.
Keep it away from water and store away from high temperatures.
• Do not remove the SD Memory Card while formatting. The card
may be damaged and become unusable.
• Data on the SD Memory Card may be deleted in the following
circumstances. We do not accept any liability for data that is
deleted if
1. the SD Memory Card is mishandled by the user.
2. the SD Memory Card is exposed to static electricity or
electrical interference.
3. the SD Memory Card has not been used for a long time.
4. the SD Memory Card or the battery is removed while the card
is being accessed.
• If the SD Memory Card is not used for a long time, the data on
the card may become unreadable. Be sure to regularly make
a backup of important data on a computer.
• Format new SD Memory Cards. Also format SD Memory Cards
previously used with other cameras.
Cleaning Your Camera
Storing Your Camera
About SD Memory Cards
Write-protect
switch
Loading ...
Loading ...
Loading ...