Loading ...
Loading ...
Loading ...
33
Getting Started
2
Inserting a Memory Card
The following memory cards can be used with this camera.
• SD Memory Card, SDHC Memory Card, and SDXC Memory
Card
• Eye-Fi card
• Flucard compatible with this camera
In this manual, these cards are referred to as memory cards.
Ideally you should use a high-speed, large-capacity memory
card.
Caution
• A memory card must be formatted with this camera before use.
(
y “Formatting a Memory Card” p.36)
1 Make sure that the camera is turned off.
2 Slide the card cover
in the direction of 1.
3 Insert the card all the way into
the memory card slot with
the memory card label facing
toward the monitor.
Insert a memory card into one or both
of the SD1 and SD2 slots.
To use an Eye-Fi card or a Flucard,
insert the card in the SD2 slot.
To remove the memory card
Push the card in again.
4 Close the card cover, and slide it in the opposite
direction of 1.
Caution
• Be sure to fully close the card cover. The camera will not turn
on if the card cover is open.
• Do not turn off the power or remove the memory card while
the card access lamp is lit.
• Use a high-speed memory card when recording movies. If the write
speed cannot keep up with the recording speed, the writing may
stop during recording.
Memo
• For details on how the data is recorded when two memory cards
are inserted, refer to “Memory Card Options” (
w p.R15).
• When using an Eye-Fi card or a Flucard, refer to “Wireless Memory
Card” (
w p.R34).
2
1
PUSH
TO
EJECT
1
2
PUSH
TO
EJECT
1
2
Loading ...
Loading ...
Loading ...