Loading ...
Loading ...
Loading ...
ALIGNMENTS AND ADJUSTMENT, Continued
Oven Pilot
The oven pilot is located along tile left hand side of tile oven burner it is lhstened under
the flame safety probe 'I'he flame of tile oven pilot ignites main burner gas when the
oven is turned on. if tile pilot flame is not present, the flame safety device will not allow
pilot gas or main burner gas to flow
=_l___a _ Safety Probe
Pilot Burner _.............__
Pilot Flame
Pilot flame size is set by the adjustment screw located along the side of the thermostat
fhe outer tip of the flame should just barely reach the underside of the end of the flame
safety probe 'l'he pilot screw must be adjusted if the range is converted to LP gas
Light tile oven pilot as follows:
• Fully press in and hold the oven control knob to alloy, pilot gas to flow to the pilot
burner it will take 30 to 60 seconds to bleed all the air out of the pilot supply line
• While pressing in the oven control knob, place a lit match or lighter under the pilot
burner to light it
• Once the pilot burner is lit, continue to hold in the oven control knob for at least 10
secouds
• if tile pilot flame extinguishes when the oven control knob is released, repeat the
above procedure
• Adjust the size of the oven pilot flame if needed
ALWAYS LIGtlf file OVEN PILOI" Wli'tl ALL CON fROL KNOBS IN fItE ¢'OI:I:"
POSI I'ION
Ovens with Electric Glow Bar Ignition:
Ranges equipped with electric ignition have an electric glow bar oven ignition system.
This type of oven cannot adjust gas flow to hold a constant temperature it operates with
a typical on-off-' cycling temperature Refer to the page 19 for more information
Ovens with glo',x bar ignition have a * shut-ofl" located at the safety valve in the rear of
the broiler area i'urn the handle on the brass valve fully clockwise to close offgas
NO'I'E: in the event of a power lhilure, a glow bar ignition oven cannot be operated
without electricity supplied to the range
Oven Ignition
On ovens with pilot ignition, lightly press in the oven control knob and turn it
counterclockv, ise to the desired temperature setting If you press the knob in too thr to
the pilot lighting position, the knob ",,,'ill not turn. Gently let up on the knob, and the
thermostat shaft will release its safety key to let you rotate the control
On ovens with glov, bar ignition, press in the oven control knob and turn it
counterclockwise to the desired temperature setting
18
Loading ...
Loading ...
Loading ...