Loading ...
Loading ...
Loading ...
BACKGUARD INSTALLATION INSTRUCTIONS
Gas Ranges
A. Remove main top.
B. Place the backguard on top of end panels at the rear of range.
C. Connect the "disconnect plug", for power to backguard if equipped with electrical
features. See No. 1.
D. Insert machine screws through lower inside flange of end caps and end panels. Secure
with the hex nuts provided. (See No. 2).
E. Insert machine screws through elongated holes (See No. 3) at bottom of backguard and
side flanges of burner box. Secure with the hex nuts provided.
E Attach lower edge of backguard to vent outlet with two sheet metal screws. (See No.4)
11
Loading ...
Loading ...
Loading ...