Loading ...
Loading ...
Loading ...
17
500M/Time
• Only workout modes of Manual, Distance, Time and Calorie are with this display function.
• For Manual workout mode as an example: When the console starts, Matrix in the middle of LCD will show the wave pat-
tern then switch to 500M/TIME 00:00 across center display after 5 seconds then switch again back to the wave pattern
after another 5 seconds and continue to repeat the cycle. This is the function of SCAN.
• The console goes directly into SCAN mode after start. If MODE button is pressed, it shows the wave pattern. Pressing
the MODE button again, it displays 500M/TIME and repeat again by pressing “MODE” button it goes back with “SCAN”
function (recyclable).
Key button Function
• Any valid key button pressed will generate a beep sound.
• When in power off mode, pressing any key button turns on the console.
Mode Key
• Under idle mode, pressing MODE key each time switches the workout mode with the following sequence:
• MANUAL » DISTANCE » TIME » CALORIES » 20/10 INTERVAL » 10/20 INTERVAL » CUSTOM INTERVAL »
Fat Burn » Cardio » Strength » Game
• The default workout mode after turning on the unit is Manual mode.
• To choose the target workout mode, when the matrix window shows the desired workout pattern and parameter window
value to be set will be blinking each second.
Up Key
• Under the setting mode of the target workout, the parameter is will be counted up.
Loading ...
Loading ...
Loading ...