Loading ...
TABLE OF CONTENTS
Introduction 2-7
Safety symbol and signal word review ..................... 2
Preparing your garagedoor ............................. 3
Tools needed ........................................ 3
Planning ........................................... 4-5
Carton inventory ...................................... 6
Hardware inventory.................................... 7
Assembly 8-11
Assemble the rail and install the trolley .................... 8
Fastenthe rail to the motor unit and Install the idler pulley ..... 9
Install the belt ....................................... 10
Tighten the belt...................................... 10
Install the sprocket cover ............................. 11
Installation 11-26
Installation safety instructions .......................... 11
Determine the headerbracket location .................... 12
Install the headerbracket .............................. 13
Attach the rail to the headerbracket...................... 14
Position the opener................................... 14
Hang the opener ..................................... 15
Install the door control ................................ 16
Install the lights ..................................... 17
Attach the emergency release rope and handle ............. 17
Electrical requirements ................................ 18
Install The Protector System®......................... 19-22
Fastenthe door bracket ............................. 23-24
Connect the door arm to the trolley .................... 25-26
Adjustment 27-29
Adjust the travel limits ................................ 27
Adjust the force ..................................... 28
Test the safety reversalsystem.......................... 29
Test The Protector System® ............................ 29
Operation 30-34
Operation safety instructions ........................... 30
Using your garagedoor opener ......................... 30
Using the wall-mounted door control ..................... 31
To open the door manually............................. 31
Care of your garage door opener ........................ 32
Having a problem? ................................... 33
Diagnostic chart ..................................... 34
Programming 35-36
To add or reprogram a hand-held remote control ........... 35
To erase all codes.................................... 35
3-Function Remotes .................................. 35
To add, reprogram or change a KeylessEntry PIN........... 36
Repair Parts 37-38
Rail assembly parts .................................. 37
Installation parts ..................................... 37
Motor unit assembly parts ............................. 38
Accessories 39
Warranty
Repair Parts & Service
39
Back Cover
INTRODUCTION
Safety Symboland Signal WordReview
This garage door opener has been designed andtested to offer safe service provided it is installed, operated, maintainedand tested in
strict accordancewith the instructions and warnings contained in this manual.
Mechanical
Electrical
When you see these Safety Symbols andSignal Words on the
following pages, they will alert you to the possibility of serious
injury or deathif you do not comply with the warnings that
accompanythem. The hazardmay come from something
mechanical or from electric shock. Readthe warnings carefully.
When you see this Signal Word on the following pages, it will
alert you to the possibility of damage to your garagedoor and/or
the garagedoor opener if you do not comply with the cautionary
statements that accompany it. Readthem carefully.
Loading ...
Loading ...
Loading ...