Loading ...
Loading ...
Loading ...
INSTALLATION STEP 9
E/ectrica/Requirements
Toavoid installation difficulties,do notrun the openerat this
time.
To reduce the risk of electric shock, your garage door opener has
a grounding type plug with a third grounding pin. This plug will
only fit into a grounding type outlet. If the plug doesn't fit into the
outlet you have,contact a qualified electrician to install the proper
outlet.
RIGHT_
WRONG
If permanent wiring is requiredby your local code, refer to the
followingprocedure.
To makea permanent connection through the 7/8" hole in the top
of the motor unit:
1. Removethe motor unit cover screws and set the cover aside.
2. Removethe attached3-prong cord.
3. Connectthe black (line) wire to the screw on the brass terminal;
the white (neutral) wire to the screw on the silver terminal; and
the ground wire to the greenground screw. The openermust
be grounded.
4. Reinstallthe cover.
Toavoid installation difficulties,do notrun the openerat this
time.
To prevent possible SERIOUSINJURYor DEATHfrom
electrocution or fire:
• Besure power is NOTconnected to the opener, and
disconnect power to circuit BEFOREremoving cover to
establish permanentwiring connection.
• Garagedoor installation and wiring MUSTbe in compliance
with ALL local electrical and building codes.
• NEVERuse an extension cord, 2-wire adapter or change
plug in any way to make it fit outlet. Be sure the opener is
grounded.
PERMANENTWIRING
CONNECTION
Ground Tab
Green
Ground Screw
Black
Ground Wire . Wire
White Wire Black Wire
19
Loading ...
Loading ...
Loading ...