Loading ...
Loading ...
Loading ...
12
1 Preparing and using for the first time
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Turn the Rotary Switch to change the water hardness
setting, e.g. to
‘25°dH’.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Insert filter’
T Place a receptacle under the dual spout.
T Remove the water tank and rinse it with cold water.
T Fit the filter cartridge extension supplied on top of a CLARIS
Smart filter cartridge .
T Insert the filter cartridge with its extension into the water
tank.
T Turn the filter cartridge clockwise until it audibly clicks into
place.
T Fill the water tank with fresh, cold water and reinsert the
tank.
E The machine automatically detects that you have just inserted
the filter cartridge.
‘Use filter’ / ‘Saved’
‘Filter is being rinsed’
, the filter is rinsed. The water flows
directly into the drip tray.
‘System is filling’, water flows out of the dual and hot-water
spout.
‘Empty drip tray’
T Empty the drip tray and put it back into the machine.
T Place a receptacle under the dual spout.
‘Machine is heating’
‘Machine is rinsing’
, the system is rinsed. The rinse stops
automatically. The start screen is displayed. Your Z6 is ready
for use.
E The display shows the products you can prepare.
Loading ...
Loading ...
Loading ...