Loading ...
Loading ...
Loading ...
the Usermenu options. Youcan usethe GuestUser option to goto the ProgramMenu without user setup data. If you want to save
your workout data, refer to the User Setup procedure in this manual.
User Setup -- Schwinn Advantage TM
The Schwinn® 40Series console lets youstore and use2 User profiles (U1and U2)in addition to a GuestUser with no setup data
stored. The Schwinn AdvantageTM feature automatically records your workout results in your User profile, and lets youtrack
your fitness progress and edit data.
The User profile stores the following information:
1. Name -- up to 12 characters
2. Total number of workouts
3. Total hours
4. Total distance
5. Total calories
6. Starting weight
7. Target weight
8. Current weight
9. Weight change (Starting Weight - Current Weight)
10. Height
11. Age
12. Custom Workout (program profile, time)
Select / Add User
1. From the POWER UP MODE screen, push the Increase/Decrease buttons to move through the User
menu options.
Note: ADD USERand GUESTUSERare the only options if no Usersare set up. If all User profiles are in
use, the ADD USERoption will not be available.
2. Push START/ENTER to make your selection. If you select GUEST USER or a User (U1 or U2), you can go
to the Program Menu to start a workout.
Note: Pushthe STOP/RESETbutton to go back to the previous screen or character.
3. In the ADD USER option, push START/ENTER 2 times and the console display will show the Name prompt.
,
Edit
1.
2.
3.
Note: Usethe Increase/Decrease buttonsto move through the alphabet (or numbers). Torecord each
letter, pushthe START/ENTERbutton. PushSTART/ENTERfor a space.
If your name does not fill the spaces on the Name screen, tap the START/ENTER button to add spaces
until the next data screen appears.
4. Enter your user data on each screen -- Weight, Height, Age, Custom Workout.
5. To set up the Custom Workout, push START/ENTER 2 times. The Program Display will have a default
resistance level of 1 for all columns. Adjust the resistance level of the active column (flashing) with the
Increase/Decrease buttons. Push START/ENTER to record the resistance level. The completed columns
move off the screen to the left, and the next column is active. Continue until all 40 columns are set.
The screen shows the message "USER ADDED" and you go to the Program Menu.
User Data
From the POWER UP MODE screen press the Schwinn Advantage TM button (Schwinn® Quality Seal).
Push the Increase/Decrease buttons to move to a User.
Push START/ENTER make the User selection.
13
Loading ...
Loading ...
Loading ...