Loading ...
Loading ...
Loading ...
2
Getting Started
38
3 Connect the USB cable to the USB
power adapter.
4 Plug the USB power adapter into a
power outlet.
The indicator lamp of the battery charger or
the power button lamp of the camera turns
on, and charging starts.
Depending on the battery level, the charging
time differs.
When charging is complete, the indicator
lamp or power button lamp turns off.
5 Remove the USB cable from the USB terminal, and close the
battery/card cover.
6 Unplug the USB power adapter from the power outlet.
Storage Capacity --------------------------------------------------------------------------------------------
• About 340 pictures can be taken when the battery is fully charged.
• This is based on tests conducted according to CIPA standards under the following conditions: At 23°C
(73°F) temperature; the monitor is on; a picture is taken every 30 seconds; the flash is fired every two
pictures; the camera is turned off and back on after 10 pictures are taken.
• The storage capacity is for reference. For long periods of use, it is recommended that you carry spare
batteries.
Caution -------------------------------------------------------------------------------------------------------
• When opening and closing the battery/card cover, be sure to remove water and dirt such as sand
adhering to the camera, and avoid locations where dirt can enter the camera interior.
• Use only genuine rechargeable battery (DB-110).
• If the battery starts to run down more quickly even after being charged, the battery has reached the
end of its service life. In this case, replace the battery with a new one.
• The battery may become very hot immediately after operation. Turn the camera off and leave it to
cool down sufficiently before removing the battery.
Memo ---------------------------------------------------------------------------------------------------------
• You can also charge the battery by connecting the camera to a computer using the USB cable. (p.93)
3
4
Loading ...
Loading ...
Loading ...