Loading ...
Loading ...
Loading ...
131
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
TV Format
Set the video signal format to be output for the TV you are using.
2 Format
NTSC (Default) : Select NTSC output.
PAL : Select PAL output.
%
•“Format” can also be set by the following procedure. However, the menu
screen is not displayed.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“V.Format:<NTSC>” appears on the display.
2. Use the main unit’s TUNER PRESET CH +, – and set the video signal format.
3. Press the main unit’s STATUS to complete the setting.
NOTE
•When a format other than the video format of the connected TV is set, the
picture will not be displayed properly.
Loading ...
Loading ...
Loading ...