User Manual - Page 123

For AVR-X1000.

Loading ...
Loading ...
Loading ...
123
Appendix
TipsPlaybackConnections
Contents
Front panel Display Rear panel IndexRemote
Settings
2 Center Width
Distributes the dialogue output from the center channel to left and right
channels and widens the sound image in the front.
0 – 7 (Default : 3)
%
•You can set this when the sound mode is Dolby PLg in the “Music” mode.
•The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
2 Delay Time
Adjust the audio delay time against video to extend the sound field
image.
0ms – 300ms (Default : 30ms)
%
•You can set this when the sound mode is “MATRIX”.
2 Eect Level
Adjust the sound eect level of the current sound mode.
1 – 15 (Default : 10)
%
•Set to a lower level if the positioning and sense of phase of the surround
signals seems unnatural.
2 Room Size
Determine size of acoustic environment. You can set this when the
sound mode is one of the original sound modes.
Small : Simulate acoustics of a small room.
Medium small : Simulate acoustics of a medium-small room.
Medium (Default) : Simulate acoustics of a medium room.
Medium large : Simulate acoustics of a medium-large room.
Large : Simulate acoustics of a large room.
%
•“Room Size” does not indicate the size of the room in which sources are
played.
2 Set Defaults
The “Surr.Parameter” settings are returned to the default settings.
Loading ...
Loading ...
Loading ...