Loading ...
Loading ...
Loading ...
32
Fig. 32-1 Remove burner clip
Fig. 32-2 Remove burner
BURNER REMOVAL
1. Remove the sideburner lid, cooking grid, sideburner
caps, and set them aside.
2. Remove the control panel. See the CONTROL PANEL
REMOVAL section for details.
3. Reach up under the burner support and remove the
burner retaining clip (see Fig. 32-1), located at the rear
of the burner pipe.
4. Make note of how the burner tube is installed over the orifice
to use as reference when re-installing.
5. Carefully lift the burner up and out, clearing the ceramic
electrode (see Fig. 32-2), and pulling the burner tube
away from the orifice located on the left side of the unit.
6. To replace, slide the burner tube in through the top opening
and carefully slide it over the orifice, aligning the burner
over the electrode, taking care not to detach it from the
wire.
Note: It is critical to the continued safe functioning of the burners
that the orifices are centered and completely inside
the burner gas inlets.
7. Replace the burner retaining clip (underneath burner).
Reference Fig. 32-1.
8. Repeat as needed for the other burner (if applicable).
9. Replace the control panel and all other components.
Remove
burner clip
Ceramic
electrode
Slide burner
outward
SERVICING AND CLEANING (Cont.)
Loading ...
Loading ...
Loading ...