Loading ...
Loading ...
Loading ...
20
4. Turn burner control knob(s) to the OFF position. Turn the gas supply on. Then carefully check all gas connections
for leaks with a brush and half-soap/half-water solution before lighting. NEVER USE A MATCH OR OPEN
FLAME TO TEST FOR LEAKS.
5. Close the shut-off valve.
POWER SUPPLY & WIRE HARNESS CONNECTIONS
CAUTION: IMPROPERLY CONNECTED WIRES WILL CAUSE DAMAGE TO THE UNIT AND MAY RESULT IN
PROPERTY DAMAGE AND/OR PERSONAL INJURY.
The unit comes with a 6' wire extension to retrieve power from a separately purchased Echelon Diamond grill.
Echelon Diamond grills are equipped with power supply boxes, which can supply power to the sideburner (see
ECHELON GRILL POWER SUPPLY BOX section below).
Alternatively; an optional power supply box may be ordered and installed to independently power this unit (see
following INDEPENDENT POWER SUPPLY section). Contact your dealer for ordering information.
Important: If installing with an Echelon Griddle, the sideburner must be powered with an independent power
supply. A griddle power supply cannot be used with Echelon side cookers.
TO INSTALL USING AN ECHELON GRILL POWER SUPPLY BOX:
1. Locate the power supply box that is connected to the Echelon Grill and ensure the power cord is disconnected,
if connected (see Fig. 20-1, A).
2. Disconnect the grill wire harness extension connectors from the power supply connectors (see Fig. 20-1, B).
INSTALLATION (cont.)
Continue to next pages for section appropriate to your setup (3A, 3B, or 3C).
Follow the text/illustrations below and on one of the following pages for proper wire
connections. The wire harnesses are labeled to further assist with connections.
Grill wire harness
(comes attached to grill)
Power supply
DO NOT
DISCONNECT
B
A
Disconnect
Disconnect
Fig. 20-1
POWER
SUPPLY
POWER
SUPPLY
Loading ...
Loading ...
Loading ...