Loading ...
Loading ...
Loading ...
Step 5: Installing Anti-Tip
Device
WARNING
RANGE TIPPING HAZARD:
All ranges can tip and injury can result. To prevent
accidental tipping of the range, attach it to the floor by
installing the Anti-Tip Device supplied.
A risk of tip-over may exist if the appliance is not
installed in accordance with these instructions. For all
ranges an anti-tip device must be installed as per
these instructions.
If the range is pulled away from the wall for cleaning,
service or for any other reason, ensure that the Anti-Tip
Device is properly re-engaged when the range is pushed
back against the wall. In the event of abnormal usage
(such as a person standing, sitting, or leaning on an
open door), failure to take this precaution can result in
tipping of the range. Personal injury might result from
spilled hot liquids or from the range itself.
WARNING
ELECTRICAL SHOCK HAZARD:
Use extreme caution when drilling holes into the wall
or floor as there may be concealed electrical wires.
Identify the electrical circuits that could be affected
by the installation of the Anti-Tip Device, then turn off
power to these circuits.
Failure to follow these instructions may result in
electrical shock or other personal injury.
ATTENTION -- PROPERTY DAMAGE:
Contact a qualified installer or contractor to determine the
proper method for drilling holes through the wall or floor
material (such as ceramic tile, hardwood, etc.)
Do not slide the range across an unprotected floor.
Failure to follow these instructions may result in damage
to wall or floor coverings.
Tools Needed for Installation of Anti-Tip Device:
Screwdriver, Phillips
Drill, electric or hand
Measuring tape or ruler
1/8" (3.17mm) drill bit (wood or metal; wall or floor)
3/16" (4.76mm) carbide-tipped masonry drill bit
(concrete or concrete block wall or floor)
3/16" (4.76mm) anchors, drywall or concrete, 4 each
(not required if mounting bracket is being attached to
solid wood or metal)
Hammer
Pencil or other marker
WARNING:
-- A child or adult can tip the range and be
killed.
-- Verify the anti-tip device has been
properly installed and engaged as per
installation instructions.
-- Ensure the anti-tip device is re-engaged
when the range is moved.
-- Do not operate the range without the anti-
tip device in place and engaged.
-- Failure to do so can result in death or
serious burns to children or adults.
See further Installation Instructions.
ilQtY/
415078 4 Screw, Phillips, #10 x 11!2''
(38.1mm)
655355 1 Anti-Tip Bracket
English 12
Loading ...
Loading ...
Loading ...