Loading ...
Loading ...
Loading ...
Reformer Owner’s Manual
8
Proper maintenance and timely replacement of your
equipment or component parts is your responsibility
as it helps reduce the risk of injury. Conduct a regular
inspection of the following:
Daily
w
Clean rails with a damp cloth.
w
Inspect retractable rope system to confirm ropes are in position
and threaded bolts of the cleats and pulley blocks are secure.
w
Ensure shoulder rests are fully seated on carriage.
w
Clean all upholstery after each use, using a soft cloth and
gentle cleanser.
Weekly
w
Ensure that all nuts, bolts and screws are securely fastened.
w
Ensure plastic feet are securely attached and have the flat side
facing towards the floor.
w
Ensure footbar and chrome adjuster bar are securely fastened.
w
Ensure pulley bar star knobs are securely tightened.
w
Inspect for excessive wear and replace rollers as needed.
Sit on the carriage and test rollers, listening for any thumping
or grinding – the ride should be quiet and whisper smooth.
w
Inspect all springs for wear and damage and replace immediately
as needed.
w
Check that bolts on the vertical frame receptacles are securely
fastened. Inspect traveling pulleys to ensure that threaded bolts
of the pulley blocks are secure. Test to confirm that the plunger
button is locking securely into the vertical frame.
Monthly
w
Check rope wear and replace as necessary.
w
Check that spring bolts and spring balls are securely fastened.
w
Check all spring clips to ensure proper fastening.
w
Check wear on star knobs and replace as necessary.
w
Check strap wear and replace as necessary.
Yearly
w
Replace all spring clips
Every 2 Years
w
Replace all springs
REPLACE ALL SPRINGS EVERY 24 MONTHS AND SPRING CLIPS
EVERY 12 MONTHS OR AS NEEDED WITHIN THAT PERIOD.
FAILURE TO PERFORM RECOMMENDED SAFETY CHECKS, OR USING
THE MACHINE WITH IMPROPERLY ADJUSTED, BROKEN OR WORN PARTS,
COULD RESULT IN SERIOUS BODILY INJURY.
IMPORTANT! PLEASE DO NOT ATTEMPT TO ASSEMBLE ON
YOUR OWN. THIS IS, AT MINIMUM, A JOB FOR TWO PEOPLE.
PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE
BEGINNING ASSEMBLY.
Place all parts from the box in a cleared area and position them
on the floor in front of you. Remove all packing material from
your area and place them back into the box. Do not dispose of the
packing materials until assembly is completed. To prevent unsafe
or improper use, please read each step carefully before beginning.
For assistance or any missing parts:
Call: Toll-free in North America 1-800-910-0001
Toll-free in United Kindom 0800-328-5676 or
Email [email protected]
Please refer to the assembly instructions included in this Owner’s
Manual for initial Assembly Instructions and Part Identification.
Mechanical Safety Check
Loading ...
Loading ...
Loading ...