Loading ...
Loading ...
Loading ...
Reformer Owner’s Manual
18
Removing Carriage
Required for replacement of Reformer springs, carriage rollers and ropes.
1 VERTICAL FRAME: Remove all springs from vertical frame,
including roll-down bar and safety chain. Loosen all four
hex bolts at the base of receptacles. Secure push-thru bar
in place by hand while removing vertical frame.
NOTE: Requires two people.
3 Remove shoulder rests (if applicable).
4 Detach all springs from gearbar. Carefully slide carriage out
of aluminum rails keeping carriage level until completely free
of rails. Turn carriage over, ensuring rollers are secure and
do not come in contact with the floor.
NOTE: Requires two people.
2 To remove carriage, remove pulleybars and place them
on floor, on either side of aluminum rails.
5 Place carriage face down on floor.
REQUIRED TOOLS:
(spx max only)
1
/
2
"(13mm) x
9
/
16
"(14mm)
Loading ...
Loading ...
Loading ...