Loading ...
Loading ...
Loading ...
Reformer Owner’s Manual
20
Replacing Springs CONT’D
1 Remove nylon locknut from spring bolt.
3 Insert spring bolt through the corresponding
hole on spring anchoring bar.
2 Thread the spring bolt through the spring holding loop.
Place 50% spring in the center, and 25% spring to one side.
Place 100% springs in remaining positions.
HIGH-PRECISION SPRING PACKAGE
3 x 100%, 1 x 50%, 1 x 25% arrange as follows:
Place 50% spring in the center and two 100% springs
on either side.
TRADITIONAL SPRING PACKAGE
4 x 100%, 1 x 50% arrange as follows:
4 Thread nylon locknut onto spring bolt.
INSTALLING NEW SPRINGS
Determine Replacement Spring Package.
Springs are color-coded at the ball end. Red = 100%, Blue = 50%, White = 25%
100 10050100 100
#1 #2 #3
#4 #5
100 2550100 100
#1 #2 #3
#4 #5
Loading ...
Loading ...
Loading ...