Loading ...
Loading ...
Loading ...
merrithew.com
23
Replacing Retractable Ropes CONT’D
7 Place screw and rimmed washer directly in the center of
replacement rope,
1
⁄2” from the end and thread completely
through rope.
NOTE: Screw must be placed exactly in the center
of rope to create a secure and safe interlock with rope
housing reel.
9
11 Wind rope around rope housing reel so rope lays flat
against hub. There should be some resistance on reel
and you should hear clicking as spring mechanism
engages. Recoil full length of rope.
8 To determine the direction rope must coil, place
empty reel on square shaft. Rotate reel in each direction.
An audible clicking sound will indicate the correct
direction to wind reel.
10 Place reel back on square shaft and replace
plastic washer. Secure cotter pin so middle curve
fits over square shaft.
12 Replace carriage (see page 24 for full instructions)
or return reformer to upright position.
Feed ropes through pulleys, attach Reformer loops
and set ropes to desired length (see pages 10
- 12).
Reset ropes between self-locking cleats then set fully
into rope retaining hooks.
REQUIRED TOOLS:
one flat-head screwdriver
Reel Direction
Loading ...
Loading ...
Loading ...