Loading ...
Loading ...
Loading ...
Error messages on the display
If the unit detects a problem, one of the following messages will appear on the display.
I
t
I
CALL SERVICE
CHECK CASSETTE
CHECK COVER
CHECK DOCUMENT
I
CHECK FILM
CHECK MEMORY
FAX IN MEMORY
FILM EMPTY
LOADING FILM
MEMORY FULL
NO RESPONSE
OUT OF PAPER
PAPER JAMMED
PC FAIL OR BUSY
POLLING ERROR
REDIAL TIME OUT
REMOVE DOCUMENT
]
]
}
]
]
i
I
I
]
]
}
]
•There is something wrong with the unit. Contact our service personnel (p. 69).
•The recording paper is jammed near the paper cassette. Clear the jammed
paper (p. 61).
•The top cover is open. Close it.
•The document is not fed into the unit properly. Reinsert the document. If
misfeeding occurs frequently, clean the document feeder rollers inside the unit
(p. 64). If the problem remains, adjust the feeder pressure (p. 63).
•The film is not inserted in the cartridge correctly. Reinsert it correctly by referring
to step 8on page 66.
• Memory (phone numbers, parameters, etc.) has been erased. Re-program.
•The unit has a document(s) in memory. See the other message's instructions to
print out the document(s). See page 40.
• Film is empty. Replace the film or film cartridge with a new one (p. 65).
•The blue leader of the film was not wound properly or the unit is out of film. wait
for a while.
=The memory is full of received documents due to a lack of recording paper, a
recording paper jam, etc. Install paper or clear the jammed paper.
•The receiving unit is busy or ran out of recording paper. Try again.
=The unit ran out of recording paper. Install paper (p. 9).
•The recording paper jam occurred near the head unit. Clear the jammed paper
(p. 61).
•The fax function cannot be operated on the PC. The RS232C cable is not
connected correctly, or the software is not running on the PC.
•The other fax machine does not have a polling feature. Check with the other
party.
•The receiving unit is busy or ran out of recording paper. Try again.
•The document is jammed. Remove the jammed document (p. 63).
• Attempted to transmit a document longer than 600 mm (235/8").Press the STOP
button and remove the document (p. 63).
Divide the document into two or more sheets and try again.
I TRANSMIT ERROR 1 -A transmissionerroroccurred.Try again.
UNIT OVERHEATED I .The unit is too hot. Let the unit cool down.
55
Loading ...
Loading ...
Loading ...