Loading ...
Loading ...
Loading ...
Changing the logo print position
The logo, telephone number, date, time and page number will be printed on the transmitted document from
your unit in the following manner.
OUT: Outside of the transmitted document's paper size (pre-selected setting).
IN- Inside of the transmitted document's paper size.
To change the setting, proceed as follows.
Press l"_.
SYSTEM SET UP I
2 Press @_],then []_.
Press [START/SET].
MODE=OUT [ ••] [
Press _ or _ to select the desired
setting.
5
6
Press (START/SET).
Press_M-_.
Dial keypad
[START/SET]
Changing the display contrast
Use this feature to adjust the brightness of the display.
The following choices are available.
NORMAL: (Pre-selected setting)
LIGHT: Used when the display contrast is too dark.
DARKER: Used when the display contrast is too light.
Press FM-ENO-').
SYSTEM SET UP
Press [_, then _][_.
J LCD CONTRAST I
Press (STARTISETI.
I MODE=NORMAL [ A" ]1
Press _ or _ to select the desired
setting.
5
6
Press [STARTISE#I.
Press _-
Dial keypad
49
Loading ...
Loading ...
Loading ...