Loading ...
Loading ...
Loading ...
Setting the silent detection
This feature allows the facsimile unit to activate the fax function automatically when a silent pause longer than 4
seconds is detected in the EXT. TAM mode.
Helpful hints:
• If you wish to receive documents from stations that do not send a calling tone after dialing, activate this
feature.
• If you use a single cassette tape to give a greeting message and to record incoming messages, deactivate this
feature.
Press 1-_. {_
I SYSTEM SET UP
I
Press {_{},then press {]_}{_}.
SILENT DETECT. I
Press [START/SETJ.
I MODE=ON [ ••]
mode.
Press _ or _ to select the desired
5
6
Press [START/SETJ.
Press[-M"_-_.
Dial keypad ISTAR'r/SET] 1-_-7/
Notice when using with an answering machine
• Every time the facsimile unit receives a document, a silent pause or a fax tone may be recorded on the
answering machine.
eAdvise callers that they should not pause for over 4 seconds while recording their voice messages.
Otherwise, the unit may switch to the fax function.
eWhen your answering machine runs out of recording tape, your unit may not be able to receive a document.
Rewind the tape to record messages.
-,When you set the answering machine to give only a greeting message, fax reception may not be available.
,,If you answer a call with the answering machine and pause for over 4 seconds, the unit may switch to the fax
mode and you may not be able to talk with the other party. To continue the conversation, press _ on the
facsimile unit.
•When the answering machine does not answer a call after 5 rings, the fax function will be activated.
eSet the receive mode of the facsimile unit to the TEL mode under the following conditions:
-when you wish to set the number of rings on the answering machine to more than 5, or
-when you wish to use auto transfer functions (transfer, pager alert, etc.) on the answering machine.
Note that automatic fax sending cannot be received automatically in the TEL mode.
48
Loading ...
Loading ...
Loading ...