Loading ...
Loading ...
Loading ...
60TH MODELS
t0 Install the front cover Rest top edge of cover on
two latch springs atong the top edge of back
cover- Swing cover down into position, engaging
the three other-latch springs Push the front
cover into position on the back cover Check that
the tip on the front Cover-completely overlaps the
lip on the rear cover
MOUNTING THE FRONT TABLE
1. Turn front table over Locate the two (2) latch
springs, two (2) alignment springs, and the four
FRONT COVER
(4) t/4-20 x 5/8 hex washer head thread forming
screws
2 install the two latch springs on the front table as
illustrated using a 3/8-inch wrench or socket
Instal! the two aligr]ment springs on the front
table as illustrated using a 3/8-inch wrench or
socket
LATCH
SPRING
_ /4-20 x 5/8
WASHER HEAD
SCREW
'_-'"""_ ALIGNMENT
, LATCH SPRING
FRONT TABLE
3 Locate the two (2) oval point setscrews t/4-20 x
1/2 and use an 1/8-inch hex "L" wrench to instalf
in the two holes, as illustrated, but do not allow
the screws to extend beyond the underside of the
table
FRONT TABLE
24
Loading ...
Loading ...
Loading ...