Loading ...
Loading ...
Loading ...
Electrical connection
81
All electrical work should be per-
formed by a qualified electrician in
strict accordance with national and
local safety regulations. Installation,
repairs and other work by unqualified
persons could be dangerous.
Verify that the voltage, load and circuit
rating information found on the data
plate match the household electrical
supply. This data must match to pre-
vent damage to the coffee system. If in
doubt, consult a licensed electrician.
The data plate can be found behind the
drip tray inside the coffee system.
The appliance is supplied with a power
cable ready for connection to an AC
120 V 60 Hz supply.
Connect the coffee system only to a
properly installed outlet with grounding
contact.
Fuse rating must be at least 15 A.
The socket should be next to the appli-
ance and easily accessible.
To reduce the risk of injury, do not
drape cord over the counter top or table
top where it can be pulled on by chil-
dren or tripped over unintentionally.
Do not connect the appliance to a
power inverter or directly to power pro-
duced outside of the normal electrical
grid (i.e. direct solar or wind power
source).
Direct connection to such power
sources can cause power surges and
tripped breakers when the appliance is
turned on, and could damage the appli-
ance.
Do not connect the appliance to energy
saving plugs or outlets. The reduction
of power to the appliance caused by
these devices will cause the appliance
to run hot and may damage it and/or
shorten its usable life.
Do not operate any appliance with a
damaged cord or plug. Contact Miele
Technical Service.
If there is any question concerning
the electrical connection of this ap-
pliance to your power supply, please
consult a licensed electrician or con-
tact Miele’s Technical Service De-
partment.
WARNING: THIS APPLIANCE MUST
BE GROUNDED
Loading ...
Loading ...
Loading ...