Loading ...
Loading ...
Loading ...
En
19
Advanced Operation
4 Press the pad to assign the function to.
The assignment is completed if the screen shown below is displayed.
5 Click the [MIDI] button at the upper right of the
Serato DJ screen.
MIDI assignment mode of Serato DJ closes.
After the setting is completed, switch the unit to the user mode to use
the Serato DJ function assigned to the pad.
Using FX TRIGGER mode
While in FX TRIGGER mode, BEAT FX can be applied by using the perfor-
mance pad even if a computer is not connected to the unit.
Parameter values are preset to each performance pad so that you can
apply the effect with a simple press of the pad.
! FX TRIGGER mode is enabled only when BEAT FX is selected.
1 Set the [INPUT SELECT] switch to [CD/LINE] or
[PHONO].
2 Press a performance pad.
BEAT FX is applied with the number of beats assigned to the pad while
the pad is pressed.
1/32 beat 1/16 beat 1/8 beat 1/4 beat
1/2 beat 3/4 beat 1 beat 2 beats
PAD1 PAD2 PAD3 PAD4
PAD7 PAD8PAD5 PAD6
! The diagram above is an example of when [ECHO] is selected.
3 Release the performance pad.
The application of the BEAT FX effect stops.
Using the fader start function
Place a check in the check box of [Fader Start options.] on the
[PREFERENCE] tab in the settings utility before using the fader start
function.
For the settings utility, see Changing the settings of this unit using the
settings utility (p. 33 ).
Using the channel fader start function
1 Set the cue.
For instructions on setting a cue point, see “TemporaryCue” in the Serate
DJ software’s manual.
= Downloading the Serato DJ software manual (p. 5 )
! Cues can also be set by moving the channel fader from the back to
the position nearest you while pressing the [SHIFT] button in the
pause mode.
2 While pressing the [SHIFT] button, move the channel
fader from the position nearest you towards the back.
Playback of the track starts from the set cue point.
! When the channel fader is moved back to the position nearest you
while pressing the [SHIFT] button during playback, the track moves
instantaneously back to the set cue point and the pause mode is set.
(Back Cue)
!
If no cue is set, playback starts from the beginning of the track.
! The setting can be changed to set the SYNC mode simultaneously
when the playback is started with the channel fader start function on
the [PREFERENCE] tab in the settings utility.
= Changing the settings (p. 34 )
! When the channel fader is moved from the back to the position near-
est you while pressing the [SHIFT] button when standing by at a cue,
track playback starts from the set cue.
Using the crossfader start function
1 Set the cue.
For instructions on setting a cue point, see “TemporaryCue” in the Serate
DJ software’s manual.
= Downloading the Serato DJ software manual (p. 5 )
! Cues can also be set by moving the crossfader to the left edge or the
right edge while pressing the [SHIFT] button in the pause mode.
2 Move the crossfader to the left edge or right edge
position.
Set to the edge opposite the side on which the channel you want to use
with the fader start function is set.
3 While pressing the [SHIFT] button, move the
crossfader in the opposite direction from the left edge or
right edge.
Playback of the track starts from the set cue point.
! When the crossfader is returned to the original position while press-
ing the [SHIFT] button during playback, the track moves instanta-
neously back to the set cue point and the pause mode is set (Back
Cue).
If no cue is set, playback starts from the beginning of the track.
When the crossfader is moved from the left edge to the right edge (or
from the right edge to the left edge) while pressing the [SHIFT] but-
ton when standing by at a cue, track playback starts from the set cue
point.
Analyzing tracks
When one of this unit’s [LOAD] buttons is pressed and tracks are loaded
onto the decks, the tracks are analyzed, but some time may be required
until analysis is completed and the BPM and waveform are displayed.
When the Serato DJ software is used as an offline player, tracks can be
analyzed ahead of time. For tracks whose analysis has been completed,
the BPM and waveform are displayed immediately when the tracks are
loaded onto the decks.
For details on using the Serato DJ software as an offline player and
instructions on analyzing tracks, see the Serato DJ software manual.
= Downloading the Serato DJ software manual (p. 5 )
! Depending on the number of tracks, some time may be required for
analysis.
Loading ...
Loading ...
Loading ...